Skip to content

Furniture from original aircraft parts. Made in Italy.

Request
information
Journal
Radial engines · Continental · Jacobs · Lycoming

The same engine in a biplane, in a tank and in an amphibious tractor

There are three data plates on the workshop bench. They carry the same engine — a Continental W-670, seven cylinders — but one says AIRCRAFT ENGINE, one says ORDNANCE ENGINE · U.S. ARMY and one says NAVY · BUREAU OF SHIPS. It is not a cataloguing error: it is the story of an engine that did three different jobs.

When you strip a radial engine, the data plate is the first thing you take off and the last thing you throw away. It is a rectangle of brass or aluminium screwed to the crankcase, carrying the model, the serial, the compression ratio, the firing order. A good many have piled up in the workshop, and three of them together tell a story that none of them tells alone.

All three carry the same engine: the Continental W-670, seven cylinders, eleven litres, a little over two hundred horsepower. But the first says AIRCRAFT ENGINE, with the «Air Corps or Bureau» model. The second says ORDNANCE ENGINE · U.S. ARMY, series 9A, serial 331478. The third says NAVY and, in larger letters than anything else on it, BUREAU OF SHIPS, number 68427.

Three different procurement offices, for the same piece of iron. Air, Ordnance, Navy.

Why an aircraft engine ends up in a tank

The reason is plain and not romantic: in 1939 the U.S. Army needed engines and had no time to design one. Air-cooled aircraft engines had three things it needed at once. They were light for the power they gave. They were already in series production, with the lines running and the workers trained. And above all they had no radiator: no water, no piping, nothing extra to be punctured.

Two drawbacks came with that, and you can still see them in the vehicles that carried these engines. A radial is round, so the engine bay had to be tall: the tanks that used one stand higher than their contemporaries, and a tall tank is a tank you can see from further away. And a radial has a habit anyone who has started one knows: when it sits, the oil drains into the lower cylinders. Before starting you turn the propeller by hand (in a tank, the engine, with a crank), to push it out. Skip that, and on the first firing the piston meets something that will not compress, and bends the connecting rod.

The number that explains it: 53,000 against 7,000

This was not an episode. In 1939 the Army picked Continental Motors to build the Wright R-975 under licence, another aircraft engine, nine cylinders, as the engine of its medium tanks. From then on the R-975 moved the M3 Lee, the M4 Sherman, the M7 Priest self-propelled howitzer, the M18 Hellcat tank destroyer and the Canadian Ram.

Here are the two figures, side by side. Wright built around seven thousand. Continental built over fifty-three thousand, for armoured vehicles.

Which means the aircraft engine was, in the end, built eight times out of nine for something that does not fly. And it is why, even today, if you go looking for an American radial of those years you will find one: they are not left over from aviation, they are left over from the ground war.

The three lives of the Continental W-670

Black engine plate: AIRCRAFT ENGINE, AIR CORPS OR BUREAU MODEL W-670, compression ratio 6.1 to 1, firing order 1-3-5-7-2-4-6, Continental Motors Corp'n, made in U.S.A.
The seven-cylinder Continental W-670, Air Corps plate

The W-670 on the first plate is the engine of the Boeing Stearman PT-17, the trainer on which thousands of American pilots learned to fly, the same biplane whose upper wing, in this collection, became a table: a wing built new, to the original drawings.

Corroded gilt plate: ORDNANCE ENGINE, U.S. ARMY, with serial number 331478, series 9A, 2400 rpm and the Continental Motors Corp. roundel.
The same engine, bought by Ordnance: series 9A, serial 331478
Plate reading NAVY at the top and BUREAU OF SHIPS in large letters: model W670-9A, 250 horsepower, 2400 rpm, number 68427, Continental Motors Corp'n.
The same engine, bought by the Navy: W670-9A, number 68427

The W-670 on the second plate, the Ordnance-marked 9A series, is the engine of the light tanks: M1 Combat Car, M2 Light Tank, M3 Stuart.

The W-670 on the third, the Bureau of Ships one, is the engine of many Landing Vehicle Tracked models: the amphibious tractors that carried troops from ship to beach. Hence the Bureau of Ships: to the U.S. Navy, a thing that floats is a ship, tracks or not.

Same bore, same stroke, same firing order 1-3-5-7-2-4-6. The plate is what changes.

Jacobs: the engine that never retired

The second name on these plates is Jacobs Aircraft Engine Co., Pottstown, Pennsylvania. The R-755 first ran in 1933 and was still being built in the 1970s, by which time the rights had passed to others: a very long life for a piston engine. Five pieces in the collection come from an R-755, among them the dining table and the wall engine section.

It flew on the Beechcraft Staggerwing, the Cessna 195, the Waco cabin biplanes, the Grumman Ag Cat cropduster and on another Stearman, the PT-18 Kaydet. A geared version was even developed for helicopters.

The bigger brother is the R-915, which in civil designation is called L-6: three hundred horsepower at 2100 rpm, three hundred and thirty on take-off. The plate we have gives the version, L-6MB, and the serial, 9699.

Lycoming: twenty-five thousand engines

The third name is The Aviation Corporation, Lycoming Division, Williamsport, Pennsylvania. The R-680 is the only one of the three with nine cylinders, and you can count all nine in the firing order stamped on the plate: 1-3-5-7-9-2-4-6-8. It is the engine behind the Lycoming coffee table, the only nine-cylinder in the collection.

Around twenty-five thousand were built. It flew on the Beechcraft AT-10 Wichita (a twin trainer built mainly of wood, for fear that aluminium would run short), on the Stinson Reliant and on the Curtiss-Wright AT-9.

What any of this has to do with a coffee table

It has a very practical bearing. When a radial engine arrives in the workshop, the question is not «which aeroplane did it come from»: it is «which engine is it». The model is what settles the cylinder count, the shape of the crankcase, how it comes apart and what it will become. The rest (whether that particular unit spent its life under the nose of a biplane, in the engine bay of a light tank or inside an amphibian), the plate sometimes says and sometimes does not.

That is why, on this site, the product pages for pieces made from radial engines carry the engine model and not an invented aeroplane. It is the information that can be checked, and it is also the only one that is any use at the bench: the model settles the cylinder count, the shape of the crankcase, which end you start taking apart.

The plate itself comes off and is put aside. On the finished piece we screw a new one, the same as the original, saying the same things: maker, model, firing order. The original, if the client asks for it, comes with the piece. Nobody sitting at that table is required to know any of it. But it is written there, on the metal, in the words of whoever built the engine.

The Radial engines page →

Radial engines — eight pieces in the collection

The sources for this issue
  1. Continental R-670 / W-670 — Wikipedia
  2. Wright R-975 Whirlwind — Wikipedia
  3. Jacobs R-755 — Wikipedia
  4. Jacobs R-915 — Wikipedia
  5. Lycoming R-680 — Wikipedia
  6. Aircraft Engine Historical Society — Continental
  7. Smithsonian NASM — Jacobs R-755-9 (L4 MB)
  8. Smithsonian NASM — Lycoming R-680