Skip to content

Furniture from original aircraft parts. Made in Italy.

Request
information
Interceptor fighter · 1958–1981 · 5,195 built

F-4 Phantom II ejection seat chair and bar stool

From the Phantom come two ejection seats and a ring of engine vanes, which sits at the centre of three DC-9 cowlings. The ejection seat armchair also comes in a swivelling office version, on request. On this page we also correct a word: that ring is not a fan, it is a stator.

The pieces that come from it

2 in the catalogue

The F-4 Phantom II first flew on 27 May 1958 and entered service in 1961 with the United States Navy. 5,195 were built between 1958 and 1981: it is the most-produced American supersonic military aircraft in history. The very last one is not even American: it is the hundred and twenty-seventh F-4EJ built under licence by Mitsubishi in Japan, rolled out on 20 May 1981.

Germany retired its F-4Fs on 29 June 2013, South Korea its own on 7 June 2024 after fifty-five years. They still fly in Greece, Turkey and Iran. In Italy the Phantom was never in service: the Italian Air Force, in those years, flew the F-104. We write that because we asked ourselves and the answer is no.

A word to correct: it is not a fan, it is a stator

Three pieces in the collection place at the centre of a DC-9 cowling a ring of vanes taken from a Phantom engine, and the catalogue called it a «fan». It is not, and it is worth explaining why, because the difference tells of two different eras of aviation. The decision to call it a stator is Carlo's, of 3 September 2026, and it holds in all three languages of the site.

The Phantom carried two General Electric J79s, and the J79 is a turbojet: all the air that enters passes through the hot core, is compressed and burned. Nothing goes around the engine, so there is no fan. What you see at the front, at the compressor inlet, is a ring of fixed vanes held between an inner and an outer ring: the J79 has seventeen compressor stages, preceded by a ring of variable-incidence vanes. Vanes that do not turn are called a stator. At the centre is the spinner, and that word is right.

The turbofan, the one with a real fan sending most of the air around the engine, is the next generation: it is the DC-9's JT8D whose cowling wraps these pieces. So in the same object there are two eras: the shell of a 1960s civil bypass engine, and inside it the stator of a military turbojet.

There is a dimensional check too. The J79 has an inlet diameter of 99.2 cm; the inner glass top of those tables measures 94 cm, and the DC-9 cowling that contains them 130. The numbers fit: the stator sits inside with the right margin.

The J79, five metres thirty long, weighs 1,740 kg. The blades of the first compressor stages are 403 stainless steel, not titanium, which in the J79 is in the rotor discs and not in the blades. For anyone polishing, that is good news: 403 steel takes a mirror finish.

The diameter matches

The ring measures about 99 centimetres, and the published maximum diameter of the General Electric J79 is 99.2. It is not a coincidence that could be stretched: it is the confirmation that the piece comes from an engine of that family, that is, from the F-4's engine.

One thing, on the other hand, must be said without going round it: the spinner at the centre of the tables is not the engine's original one. It is another part, chosen for its shape. Anyone looking at a photograph would assume the opposite, so it gets written down.

The seats

A bar stool and a chair come from two Phantom ejection seats. They are by Martin-Baker, an English company founded in 1934 by James Martin and Captain Valentine Baker, based at Denham in Buckinghamshire and still today in the family's hands: there are four Martins on the board.

The number worth knowing is this: Martin-Baker seats have saved the lives of more than 7,700 airmen. Five hundred by 1961, a thousand by 1965, five thousand by 1983. Since 1957 there has been the Ejection Tie Club, the club of those saved by one: it has more than six thousand members, and to join you have to have actually ejected.

Stamping on the seat structure: MBEU/105 H5-9-R9 7135.
The H5 marking on the Phantom seat · Martin-Baker Mk.H5

Two types were fitted to the Phantom. The Mk H5, whose Martin-Baker data sheet reads «minimum height and speed: zero / 90 knots»: on the ground, stationary, it did not work. And the Mk 7, version 7A, which reads «zero / zero»: it works stationary, on the ground, because a rocket pack has been added to the ejection gun. Between two lines of a data sheet lies the difference between a pilot who survives on the runway and one who does not.

What has to come out before it becomes a chair

An ejection seat is not an inert object: it is a pyrotechnic machine. Inside a Mk H5 there are a primary cartridge and two secondaries in the gun that fires the seat out at eighty feet per second; a second cartridge in the gun that deploys the drogue parachute, fired by a half-second clockwork delay; a cartridge-actuated guillotine that cuts the straps. In the Mk 7 the rocket pack is added.

All these charges are classified internationally as explosives — UN 0275 and UN 0276, «cartridges, power device», class 1.3C and 1.4C — and must be removed or made inert before a seat can be sold, shipped or even displayed as a civil object. The operation has a technical name, demilitarisation, and it is not a formality.

How the seats arrive

They arrive already demilitarised, bought from an importer who handles them that way. There is no certificate: nobody issues one, and saying so is more useful than letting it be inferred. What there is, is the chain (who demilitarised them, who imported them, who bought them), and it can be recounted to anyone who asks.

In the workshop the padding is redone. The structure remains the original: the shell, the rails, the data plates. It is why the piece weighs and behaves like an ejection seat and not like an armchair that resembles one.

The evidence

The plates and markings photographed on the pieces. They are what this page rests on: where there is no plate, the page says so. The serial number visible on each of them belongs to the component that was photographed: every piece carries its own, and it is written on the certificate that comes with it.

Sources for this page
  1. Martin-Baker — the company’s history and lives saved
  2. Martin-Baker — the Ejection Tie Club
  3. Martin-Baker — the Mk 5 seat
  4. Martin-Baker — the Mk 7 seat
  5. CyberModeler — the Mk.H5 on the F-4s built up to 1970
  6. McDonnell Douglas F-4 Phantom II — Wikipedia
  7. F-4 Phantom II operators — Wikipedia
  8. Mitsubishi F-4EJ Kai — the last Phantom built
  9. General Electric J79 — Wikipedia, data from Jane’s 1974-75
  10. UN numbers 0275 and 0276 — the classification of cartridges

The pieces that come from it ↑