ATR fuselage wall bars with aircraft windows
The five pieces that come from the ATR are all fuselage sections. It is the only aircraft in the collection whose fuselage was built in Italy: at Pomigliano d’Arco, near Naples.
The pieces that come from it
5 in the catalogueOn 4 November 1981, in Paris, the chairman of Aeritalia, Renato Bonifacio, and the chairman of Aérospatiale, Jacques Mitterrand, signed the agreement that created ATR, Avions de Transport Régional, Aerei da Trasporto Regionale: two names, one French and one Italian, for a company based in Toulouse and owned half and half. Today the two halves are called Airbus and Leonardo.
The thing that makes this page different from all the others
For almost every aircraft in this collection we are the country of arrival: the airframe was born elsewhere, flew elsewhere, and reaches Reggio Emilia at the end. Not with the ATR.
The Alenia Aermacchi press release of January 2012, the one about the thousandth fuselage, says it without hedging: the entire fuselage of every ATR, fully outfitted, is built at the Pomigliano d'Arco plant near Naples, and from there goes to Toulouse where the aircraft is assembled. The release of 6 June 2018, the fifteen-hundredth, repeats it. The tail surfaces, in composite, are made at Foggia; the wings, those yes, are made in France.
So: the sheet metal of these five pieces was bent in Campania, flew for thirty years, and came back to Italy to become a piece of furniture. It is not a story built to order. It is the real journey of that metal.
The aircraft
The ATR 42 first flew on 16 August 1984 from Toulouse; the first production aircraft went to Air Littoral on 3 December 1985 and entered service on 23 December. The ATR 72, the stretched version, flew on 27 October 1988 and entered service the following year. The series 300, the one of the early aircraft, was built until 1996. In all, ATR has sold about 1,900 aircraft to two hundred operators in more than a hundred countries, and the line is still open: the 42 and 72 are assembled on the same line and share components, which keeps both alive.
A technical detail concerning the wing rather than our pieces, but worth having: the ATR 72 of 1988 was the first civil aircraft in the world with an outer wing box in carbon fibre. The wing of this turboprop is about 30% composite by weight. The fuselage, on the other hand (the part that becomes furniture), is metal.
The section and the windows
The ATR cabin has a circular section, 2.57 m wide inside, with four seats abreast. Our panels are 156 cm tall: they are portions of the side wall, taken between the floor and the curve of the ceiling.
On window pitch we can say something we have found published nowhere, and we say it because we measured it on the pieces: our sections are about 105 cm with two windows, 160 with three, 220 with four, 275 with five. The difference between one pitch and the next is between 55 and 60 centimetres. That is the rhythm at which the ATR places its windows, derived from the pieces and not from a drawing: we say it for what it is.
The stamp is Italian

Inside the fuselage, on a stringer beside a window, there is an oval stamp reading ALENIA with the inspector's number below it, 914. It is the confirmation this page was waiting for: in the ATR consortium the fuselage is the Italian part, and the piece carries the stamp of the people who built it, at Pomigliano d'Arco.

Beside it, written by hand on the green primer, are the reference station
(STA 13319B R/H, the right-hand side), a drawing number and the date
7 April 1991. Stamped into the skin is 1553571302 216 A00.
What remains and what is missing
The insulation is still there. Behind the lining the aircraft's insulation blankets remain: it is the most direct proof that the piece comes from an airframe that flew, and not from a stock of spares never fitted.
The window panes are not, and it is worth saying why. When an aircraft is dismantled the windows come off first and stay in the spares market, because they are needed by the ATRs that still fly. The fuselage arrives without them. It is something you can see: the apertures are there, the glass is not.
Frames and stringers are removed as little as possible. How much to remove is decided piece by piece, looking at the dimensions of that fuselage: the internal structure is what holds the curvature, and taking too much out makes the panel yield and the curve open up. It is the reason these pieces keep the shape they had on the aircraft instead of flattening against the wall.
Why they can be found
The ATRs have not left the stage: they have simply reached the end. In September 2024 Buddha Air, in Nepal, retired an ATR 42-320 after putting 70,000 cycles on it, seventy thousand take-offs and seventy thousand landings. A regional aircraft flies short sectors and many cycles: it is the number of cycles, not the hours, that decides when an airframe is finished. The series 300s of the 1980s and 1990s are the ones that have reached the end of the line, and they are the ones that get recovered.
The evidence
The plates and markings photographed on the pieces. They are what this page rests on: where there is no plate, the page says so. The serial number visible on each of them belongs to the component that was photographed: every piece carries its own, and it is written on the certificate that comes with it.
- Leonardo — the thousandth ATR fuselage at Pomigliano d’Arco
- Leonardo — the 1,500th fuselage delivered to ATR, 6 June 2018
- Leonardo — ATR turns 40
- ATR — who we are
- ATR — forty years in business
- ATR 42 — Wikipedia
- ATR 72 — Wikipedia
- Aircraft Commerce — ATR 42 and 72 technical guide
- 14 CFR 25.807 — emergency exit types