Boeing Stearman wing tables
The two Stearman tables are the skeleton of a Boeing Stearman Series 75 upper wing, built new to the original drawings and left without fabric, under a glass top. So each one is an aircraft wing table in the literal sense. They are 152 centimetres wide: that is not a dimension we chose, it is the chord of that aircraft’s wing, which is exactly five feet.
The pieces that come from it
2 in the catalogueAlmost always, on this site, to tie a piece to its aircraft we have to measure and reason. Not here. The chord of a Stearman's wing (the distance from leading edge to trailing edge) is five feet, that is 152.4 cm, the same on the upper and the lower wing. Our two tables are 152 cm wide. The width of the table is the chord of the wing, untouched.
A wooden wing
It is worth saying at once what it is, because it is the only wooden wing in the whole collection. The Stearman has a welded steel-tube fuselage and wooden wings covered in fabric: Sitka spruce spars, truss-built ribs with plywood gussets, aluminium leading and trailing edges, and over all of it doped fabric.
The skeleton you see is exactly that of a wing before the fabric goes on. It is not an object made to resemble a wing: it is a real wing, built like the ones that fly, without the fabric.
Two points of honesty. We have found no manufacturer's document saying whether the spar is solid, routed or laminated: the shops that rebuild Stearman wings today speak of Sitka spruce and Douglas fir, but those are interested parties. And the fabric: the aircraft flying today are almost all covered in modern polyester, not the original cotton. The Smithsonian's record for a restored PT-13D lists exactly «polyester».
Why a single wing measures between 250 and 381 cm
The Stearman's upper wing is 9.80 m in total (32 feet 2 inches), but it is not one piece. It is made of a centre section, carrying the 174-litre tank above the pilot's head, and two outer panels bolted to its sides. The American airworthiness directives confirm it indirectly: one of them requires the centre-section tank to be removed to inspect its two spars, which therefore belong to it and not to the whole wing.
A single-wing table comes from one upper outer panel. The «Combo» version comes from a right-hand panel and a left-hand one. It does not span the aircraft's wingspan (that would be nearly ten metres), and we do not say that it does.
A rebuilt wing, and we say so ourselves
There is something to make clear about these two tables, and the owner makes it clear: the upper wing is not an old wing recovered from an aeroplane. It is a wing built new, from the assembly kits sold in the United States to return a Boeing Stearman series 75 to flight or to rebuild one. The ribs come from the kit and are made as though they were going to fly.
The spars are machined on a multi-axis CNC machine, to the original Stearman drawing and design: the old dated and signed drawings, supplied by the kit maker, were redrawn in three dimensions in the workshop so they could be sent to the machine.
So, put exactly: a wing rebuilt to the original drawing, not an original period wing. The two are not the same thing, and calling them by the same name would be a cheap deception. What is real here is the geometry: a biplane wing made the way it was made in 1934, with the ribs in view under the glass.
The wood is stained and protected with a surface clear coat: the treatment is there to defend it, not to make it look old.
Why Stearman wings are about
The reason is a rule, and it is still in force. Three airworthiness directives bear on the Stearman's structure, and one of them — 50-06-02, of 1950 — requires the centre-section spars to be inspected every year, looking for cracks and warping. Warping is a defect of wood: the spar twists with humidity. Another, 46-24-01, requires the wing to be drilled to let water out, because otherwise the ends of the lower wing's ribs rot.
A wing that fails that inspection is not repaired: it is replaced. There are specialist shops that build new Stearman wings to the original drawings. And the old one leaves service whole, with its skeleton still sound everywhere else.
To that add the numbers. Between 1935 and 16 February 1945, the day the last one left Wichita, about 8,400 complete aircraft were built, plus spares for two thousand more. Boeing itself quoted 10,346 counting the spare parts. After the war they sold for a few hundred dollars, and almost all became crop dusters: according to those who restore them, ninety-nine per cent of the Stearmans flying today have been through agriculture. Delta Air Lines had thirty-one in its agricultural division in 1954. About fifteen hundred still fly.
The engine, and a curiosity about names
The Stearman carried almost all the radials in this collection: the Continental R-670 on the PT-17, the Lycoming R-680 on the PT-13, the Jacobs R-755 on the PT-18. They are the same engines the radial engines page is about, and it is no coincidence: they were the power class of the trainers.
There is a small historical muddle about the names that is worth clearing up. PT-13, PT-17, PT-18 are US Army designations and distinguish the engine; N2S is the Navy's designation, which called it the Yellow Peril for its colour; Kaydet is the Canadian name. Same aircraft, four names. The only case of complete standardisation between Army and Navy during the war was the last version of all, the E75: PT-13D for one, N2S-5 for the other.
- National Stearman Fly-In — the aircraft’s dimensions
- National Stearman Fly-In — the Model 75 in detail
- Smithsonian NASM — Boeing-Stearman N2S-5 Kaydet
- National Museum of the USAF — Stearman PT-13D Kaydet
- New Zealand CAA — the Stearman airworthiness directives
- Military Aviation Museum — wooden wings, steel fuselage
- HistoryNet — «The Timeless Boeing 75»
- Delta Flight Museum — the agricultural division’s Stearmans, 1945–1966
- Smithsonian NMAAHC — the PT-13D «Spirit of Tuskegee», materials
- Boeing-Stearman Model 75 — Wikipedia