Skip to content

Furniture from original aircraft parts. Made in Italy.

Request
information
Light twin · 1937–1969 · more than 9,000 built

Beechcraft 18 engine cowling wall bar

A single piece, a bar cabinet made from an engine cowling. And it is the only aircraft in this collection that the Italian Air Force actually operated: a hundred and twenty-five of them, from 1949.

The pieces that come from it

1 in the catalogue

The Beechcraft Model 18 first flew on 15 January 1937 and the last aircraft was delivered on 26 November 1969. Thirty-two years of uninterrupted production, a record for a piston aeroplane, and more than nine thousand built. It was called the Twin Beech, and in uniform it had a name for every trade: C-45 Expeditor for transport, AT-7 Navigator for training navigators, AT-11 Kansan with a glazed nose and the Norden sight for training bomb aimers, SNB for the Navy.

The aircraft Italy really had

Of all the aircraft in this collection, the Beech 18 is the one with the most direct Italian connection. The Aeronautica Militare operated 125 of them from 1949 and right through the 1970s. The first fifty-nine arrived under a three-year American military assistance programme and entered service in March 1949 with the 46º Stormo at Pisa. They flew liaison between units and observation for sea search; two were used for fast liaison between the provincial capitals in Somalia.

It should be said that this figure does not come from an official Air Force document (its pages were not reachable) but from two independent sources that agree on the number and the year. We report it for what it is.

The cowling

The engine is the Pratt & Whitney R-985 Wasp Junior: nine cylinders, 16.1 litres, 450 horsepower, one of the most successful radials ever built. 39,037 were made up to 1953. Its size is documented twice: the published specification gives 116.2 cm maximum diameter, and the Smithsonian's example, measured with its accessories fitted, is 117.5.

Our piece measures 120 cm in its largest dimension. The external diameter of the Beech 18 cowling is not published by any source. We looked in museums, in the regulations and in the type certificate, and it is not there. So we do not write a number we do not have: what can be said is that a cowling of a hundred and twenty centimetres is exactly where it needs to be to wrap an engine of a hundred and sixteen. It is a deduction from the engine, not a specification.

One detail visible at a glance that helps to date the piece: the early versions of the Beech 18 carried Wright engines, and their cowlings had bumps over the rocker covers. With the arrival of the Wasp Junior the cowling becomes smooth. A cowling without bumps therefore comes from the P&W version.

It is smooth

The engine cowling in the warehouse, seen from the side: the metal is smooth and unbroken, without the bumps that stand proud over the rocker covers.
The cowling is smooth: it is the Wasp Junior version

The cowling has no bumps, and that closes the paragraph above. The bumps on the cowlings of the early Beech 18s are there because the rocker covers of the Wright R-760 project beyond the profile. With the arrival of the Pratt & Whitney R-985 Wasp Junior the cowling becomes smooth, and ours is smooth.

That means it comes from the post-war version, that is, from by far the most numerous part of the roughly nine thousand Beech 18s built. From deduction to fact: you only had to look.

Why so many were scrapped

The Beech 18's structure has a peculiarity: the centre-section spar is not aluminium but a welded steel-tube truss, carrying the engines and the undercarriage. In the 1970s cracks began to appear, especially on the ex-AT-11 bombing trainers, which had made an enormous number of take-offs and landings.

In 1975 the FAA issued directive 75-27-09 R2: either a stainless steel external strap tying the two wing panels together was installed, or the aircraft did not fly again. Installation takes about two hundred hours of work, two mechanics for two weeks. On top of that a life limit was imposed: 10,000 hours after strapping, or 20,000 hours from build, whichever comes first. On an airframe by then of little value, the sums almost never worked. Those who restore these aeroplanes sum it up like this: many Twin Beeches died that year, because the owners decided it was not worth the money.

That is where the pieces come from: not from accidents, but from a signature not put at the bottom of an estimate.

The evidence

The plates and markings photographed on the pieces. They are what this page rests on: where there is no plate, the page says so. The serial number visible on each of them belongs to the component that was photographed: every piece carries its own, and it is written on the certificate that comes with it.

Sources for this page
  1. Smithsonian NASM — Beechcraft D18S Twin Beech
  2. Smithsonian NASM — Pratt & Whitney R-985-AN-14B, the example’s dimensions
  3. National Museum of the USAF — Beech C-45H Expeditor
  4. Peter M. Bowers, «Beech 18» — AOPA Pilot, February 1983
  5. CASA Australia — AD/BEECH 18/17, the spar directive
  6. New Zealand CAA — Beechcraft D18S directives
  7. Norman Polmar, «A Most Versatile Aircraft» — US Naval Institute, 2014
  8. MAPS Air Museum — Beechcraft Model 18 / SNB-5
  9. twinbeech.com — the spar strap and its effects
  10. volareflyfree — the history of the Beechcraft C-45 in Italy
  11. Pratt & Whitney R-985 Wasp Junior — Wikipedia

The pieces that come from it ↑