Skip to content

Furniture from original aircraft parts. Made in Italy.

Request
information
C-130 Hercules · from 1954 · more than 2,700 built, 63 countries

Lockheed C-130 Hercules

An armchair made from a C-130 flight deck seat. It is not an ejection seat: it is the chair of someone who expects to land. The Italian Air Force has flown this aircraft from Pisa since 1972.

The pieces that come from it

1 in the catalogue

The prototype of the Lockheed C-130 Hercules flew on 23 August 1954 at Burbank. Deliveries began in December 1956 and have never stopped: Guinness World Records certifies that the C-130 assembly line is the longest-running in history for a military aircraft. More than 2,700 aircraft, over seventy versions, sixty-three countries. An aeroplane designed when Constellations were still flying, and still in production today.

The Lockheed Super Constellation propeller in the collection is on the Douglas DC-3 page.

The chair, and what it is not

This page also serves to clear up a difference, because this site has two chairs made from ejection seats and they could be confused.

The C-130 has no ejection seats. The US Air Force's official fact sheet lists a crew of five on the E and H versions (two pilots, navigator, flight engineer and loadmaster) and provides for no ejection system at all. Those who have flown it put it bluntly: in an emergency you jettison the entrance door and jump out of that hole, and parachutes often were not even carried on board, except those hung in the hold. A fighter's ejection seat is a machine that fires a man out; this is a working armchair, built for a crew that expects to land.

It is built by Ipeco, an English company at Southend-on-Sea, which supplies the C-130's flight deck seats. They are fully adjustable: fore and aft, in height, with reclining back, tilting headrest, lumbar support adjustable in two directions and a thigh support. Armour exists, but it is a separately fitted accessory, a plate added to protect against rounds fired from below. The standard seat is not armoured.

Three things we have not found documented, and we do not write them: the type of harness, the frame material, and whether this example comes from a pilot's position or the navigator's, which on the C-130 uses a very similar seat. Without a readable plate, the honest thing to say is «flight deck seat».

What the plate says

There is no maker's plate on the seat. What is known comes from the workshop, and it is worth writing because it changes how the piece is seen: the original harness is gone (they arrive already stripped) and the upholstery has been redone. What remains is the structure, which is the one the seat flew with.

The C-130 and Italy

The Italian Air Force has flown the C-130 for more than fifty years, and the story of its first arrival is worth telling.

On 23 March 1972 two Italian crews took off from Marietta, Georgia, with the first two C-130Hs destined for Italy. The first aircraft had a technical fault and had to turn back to Bermuda. The second went on: so it was Major Fronzoni, Captain De Falco, Warrant Officers Perrotta and Pedrotta and General Gandolfi who were the first Italians to take a Hercules across the Atlantic. They landed on 27 March 1972. On 9 May the first seven arrived at Pisa, and the unit became the 46ª Aerobrigata Trasporti.

In all Italy received fourteen C-130Hs, serials MM61988 to MM62001. From 2000 came the C-130Js: twenty-two aircraft (ten stretched, six KC-130J tankers and six standard) delivered up to 10 February 2005. Among them was the first C-130J tanker ever built, able both to refuel in flight and to be refuelled. They still fly from the 46ª Brigata Aerea at Pisa.

Why a seat leaves an aircraft that is still flying

The aircraft does not have to be scrapped. At mid-life the C-130 undergoes an operation that those who carry it out compare to spinal surgery: the centre wing box replacement. The outer wings, the fuel system, the wiring and the plumbing all come off; the old box is cut away and lifted out with an overhead crane. Twenty-year-old plumbing and wiring are thrown away and remade. The company that has done nearly eighty of them reckons the operation gives the aircraft more than twenty years of life back.

In work like that the whole interior comes out, and what goes back in is often new. It is one of the ways an original seat reaches the market while its airframe goes on flying. The other is the real end: the AMARG yard at Tucson, Arizona, where more than four thousand aircraft stand and where parts recovery is an ordinary, organised activity.

Sources for this page
  1. Lockheed Martin — the history of the C-130
  2. Guinness World Records — longest production run for a military aircraft
  3. US Air Force — official C-130 Hercules fact sheet
  4. Ipeco — flight deck seating
  5. Armour of America — the accessory armour for the C-130 Ipeco seat
  6. The Aviation Geek Club — why C-130 crews did not carry parachutes
  7. Centro Culturale Aeronautico «Ugo Antoni» — how we brought the first C-130s to Pisa
  8. Lockheed Martin — C-130J deliveries to Italy completed, 2005
  9. Italian Ministry of Defence — the C-130J data sheet
  10. Marshall Group — centre wing box replacement
  11. The AMARC Experience — what AMARG is

The pieces that come from it ↑