Skip to content

Furniture from original aircraft parts. Made in Italy.

Request
information
Skin panels · 12 pieces · from different aircraft

Aircraft fuselage wall panels and room dividers

Twelve wall pieces and room dividers, made from real fuselage panels. This page also sets out the scale the site uses to declare, piece by piece, how much we know about where it comes from.

The pieces that come from it

1 in the catalogue

On this site's product pages provenance is declared at three levels, and they are not a marketing label: they are three different degrees of proof.

Level I: we know the aircraft's registration. That is, we know which airframe flew, and we can tell its career.
Level II: we know the type of aircraft, not the individual airframe. We know a cowling comes from a DC-9 because the size, the engine and the component all match, but we do not know which DC-9.
Level III: we know it is a genuine aircraft part, and nothing more. It is the level of this page.

Where these panels come from

This is not an aircraft: it is a family of pieces that, by the very way they come about, have no single aircraft behind them.

A fuselage section is cut from a curved skin panel with its windows, its stringers and its rivets. That panel cannot be ordered: it has to be found. The stock changes, and with the stock the aircraft changes.

Number ink-stamped on the panel's inner stringer: 65-45247-611, below it the date 4-2-87, beside it the inspector's round stamp.
The part number on the panel's inner stringer · 65-45247-611

In September 2026 there are Boeing 737 panels, Boeing 727 panels and others from aircraft we have not identified. About one of these panels we know more: stamped on the inner stringer is 65-45247-611 with the date 4-2-87, and the panel still wore USAir livery when it came into the workshop. Those are the part number and the airline, not the aircraft's registration: by the way they come about, these pieces cannot have a registration.

The panel's outer skin, with its row of windows and, above them, the USAir lettering in the original colours.
The livery on the raw skin. It is removed during finishing: the photograph says where the panel comes from, not what the finished piece looks like.

The livery does not reach the finished piece: it is removed in the workshop. When you order, we tell you which panel the piece we ship is made from.

The evidence

The plates and markings photographed on the pieces. They are what this page rests on: where there is no plate, the page says so. The serial number visible on each of them belongs to the component that was photographed: every piece carries its own, and it is written on the certificate that comes with it.

The pieces that come from it ↑