Skip to content

Furniture from original aircraft parts. Made in Italy.

Request
information
Helicopters · from 1939 · and an Italian factory under licence

Sikorsky helicopter carbon fan dining table

A dining table built around a carbon-fibre disc 118 cm across. On this page, for once, the honest thing to say is that we do not know for certain what the piece is, and we explain why.

The pieces that come from it

1 in the catalogue

On every other page of this site we have measured, compared against published data and deduced. Here the method gives an uncomfortable answer: no documented component of a Sikorsky helicopter matches a carbon-fibre disc of 118 cm. We write that instead of filling the gap.

Why the description «engine fan» cannot be right

A helicopter has no fans. It is driven by turboshaft engines, which put all their power into the rotor rather than into a ducted fan: the large bladed disc of a turbofan does not exist on a helicopter. And the Black Hawk's engine, the General Electric T700, is 64–66 cm in diameter overall: a 118 cm disc is almost twice the width of the whole engine.

We checked every possible candidate, one by one.

Tail rotor? All too large. The Black Hawk's tail rotor is 335 cm, the S-92's the same, the Sea King's 323, the S-76's 244. The smallest in the family, that of the light Schweizer 300/333, is 130 cm: twelve centimetres too many, and they are metal blades, not carbon.

Ducted rotor? Sikorsky built only one, the eight-bladed fantail of the RAH-66 Comanche, at 137 cm, the closest value of all, but still nineteen centimetres away. And above all: two prototypes of the Comanche were built, both preserved at the US Army aviation museum. No parts of it are in circulation.

Oil cooling fan? Those do exist, but the manufacturers publish them as centrifugal aluminium fans of four and a half kilos: not carbon discs of over a metre.

Finally there is an objection about the words themselves. Carbon-fibre fans, in aviation, exist practically only on the very largest civil turbofans: the first was the General Electric GE90's in 1995, and it is 310 cm across. A true «carbon fan» is a three-metre object, not a one-metre one.

What can be read on the piece

Part number stamped on the yellow disc: 163080385-2, with the word ASSY beside it, the number 2628 and an inspection stamp.
The part number — the one thing that can settle this

Stamped on the disc is a part number: 163080385-2, with the word ASSY beside it and the number 2628. On the outer ring, in yellow stencil, is a workshop legend saying what it was for: ENGINE ANTI CORROSION, with an arrow. It is the mark indicating the engine wash point, so the piece was on an engine installation, not on a rotor.

The whole piece seen from above: a ring of short, wide vanes between a dark outer band and a large yellow centre disc lightened by six holes.
The ring of vanes and the centre disc, lightened by six holes

The geometry says the rest. The vanes are many, short and wide, held between an outer ring and a large central disc lightened by six holes: it is the shape of a ducted fan, not of a helicopter rotor and not of a turbofan fan, which has long twisted blades. The diameter is 118 centimetres.

The owner's hypothesis (a cooling fan from a piston engine) is the one the shape best supports: helicopters with a radial engine in the nose cool it with a ducted fan of that class. But the part number, searched in open sources, gives nothing: without a parts catalogue it does not close, and this page does not close it.

Meanwhile, who we are talking about

Igor Sikorsky was born near Kiev in 1889, emigrated to the United States in 1919 and founded his company in 1923, on a chicken farm on Long Island. On 14 September 1939 his VS-300 lifted three feet off the ground for ten seconds: the first flight of the helicopter that would establish the formula, one main rotor and one tail rotor, still used today by almost everyone. The first free flight was on 13 May 1940; in 1941 the VS-300 stayed up for an hour and a half. In 1943 the R-4 became the first helicopter in the world in series production. Since 6 November 2015 Sikorsky has been part of Lockheed Martin.

The Italian part, which is documented

If the piece stays without a name, the link between Sikorsky and Italy does not.

Agusta, at Cascina Costa di Samarate in the province of Varese, built Sikorsky helicopters under licence for decades. The Italian Sea King is called the AS-61: the first SH-3D built by Agusta was delivered in December 1968, and the Italian Navy went on to buy thirty-six; the Air Force received the HH-3F rescue variants, which in forty-six years of service flew more than 185,000 hours and saved about seven thousand people. The Navy retired its Sea Kings in June 2013, after almost forty-five years.

The figure that gives the measure: the Sikorsky historical archives record that of the S-61 family it built 794 in house, and its licensees in Britain, Japan, Canada and Italy another 679. Almost half that family of helicopters was not born in America.

That is company history, not provenance: it does not make an unidentified disc a Sikorsky part. But it explains why Sikorsky components are about in Italy.

The evidence

The plates and markings photographed on the pieces. They are what this page rests on: where there is no plate, the page says so. The serial number visible on each of them belongs to the component that was photographed: every piece carries its own, and it is written on the certificate that comes with it.

Sources for this page
  1. Igor I. Sikorsky Historical Archives — the life of Igor Sikorsky
  2. Igor I. Sikorsky Historical Archives — the VS-300
  3. Igor I. Sikorsky Historical Archives — S-70A / UH-60A Black Hawk
  4. Igor I. Sikorsky Historical Archives — the S-61 and licence production
  5. Vertipedia — Boeing-Sikorsky YRAH-66 Comanche, the ducted rotor
  6. General Electric T700 — Wikipedia
  7. GE Aerospace — thirty years of carbon-fibre fans
  8. Safran — helicopter oil cooling fans, in aluminium
  9. Leonardo — from the beginnings to today, the history of helicopters
  10. MILAVIA — the retirement of the Italian Navy’s Sea Kings
  11. Lockheed Martin — the acquisition of Sikorsky, 6 November 2015

The pieces that come from it ↑