Skip to content

Furniture from original aircraft parts. Made in Italy.

Request
information
Reception desk made from a Douglas DC-8 engine cowling and coffee table made from a Continental radial engine in a private lounge: the mirror-polished desk with the propeller on the wall, the glass-topped table and a leather sofa, in front of the glass walls

Garages and man caves · Gold Coast, Australia · 2025

A garage man cave furnished with original aircraft parts

The lounge: the Douglas DC-8 cowling reception desk with the three-blade propeller on the wall, the radial engine coffee table and the sofa, in front of the meeting room’s glass walls · Reception Desk DC-8 AIR-REC0049 · Coffee Table Continental AIR-TAV0052 · private garage, Gold Coast, 2025

Projects and installations · Garages and man caves

A private garage on the Gold Coast, Australia, where the client keeps his car collection, has become his man cave: a bar beside the cars, a lounge with a reception desk and, behind the glass walls, a meeting room for business meetings. Arteinmotion furnished it in February 2025 with eleven pieces, nine of them made from original aircraft parts: the engine cowling of a Boeing 747 turned into a bar, that of a Douglas DC-8 turned into a reception desk, the wing of a Boeing Stearman under the top of the meeting table, the air intake of an Airbus A310 turned into a bookcase, a fuselage section on the wall, a Continental radial engine under the glass of the coffee table, the fuel tank of an Alpha Jet hung as a lamp, a three-blade propeller and a Douglas DC-8 cowling mirror. On this page, the space, the pieces one by one with their product pages, and the story of the installation. The photographs show the finished space: no setting images.

Talk about a project
Location
Gold Coast, Australia
Installed
February 2025, in four days
Pieces
11, nine made from original aircraft parts
Client
Private, not named
Reception desk made from a Douglas DC-8 engine cowling in a private lounge: the mirror-polished engine cowling seen from the front, with a three-blade propeller on the black slatted wall
The Douglas DC-8 cowling reception desk, mirror-polished, with the three-blade propeller on the slatted wall · Reception Desk DC-8 AIR-REC0049 · Wall Propeller AIR-ELI0006 · private garage, Gold Coast, 2025
Table made from a Boeing Stearman wing and bookcase made from an Airbus A310 air intake in a private meeting room: the wooden ribs under the glass, eight grey chairs, the polished ring set into the black wall
The meeting room: the Boeing Stearman wing table with the Nella chairs, and the Airbus A310 cowling bookcase set into the black wall · Wing Table Boeing Stearman AIR-TAV0102 · Bookcase Airbus A310 AIR-LIB0173 · private garage, Gold Coast, 2025
Aircraft fuselage section with five windows on the wall of a private garage: the mirror-polished skin reflects the garage and the cars
The fuselage section with five windows, mirror-polished, on the garage’s block wall · Wall Fuselage AIR-FUS0159 · private garage, Gold Coast, 2025
Coffee table made from a Continental W-670 radial engine in a private lounge: the seven painted cylinders under the round glass top, in front of a leather sofa
The Continental W-670 radial engine coffee table, seven cylinders under the glass, in front of the lounge sofa · Coffee Table Continental W-670 AIR-TAV0052 · private garage, Gold Coast, 2025
Bar made from a Boeing 747 engine cowling in a private garage: the polished counter with the stools, the fuel tank lamp hanging above and the fuselage on the wall, next to a white sports car
The garage: the Boeing 747 cowling bar with the Space stools, the Alpha Jet fuel tank lamp and the wall fuselage, next to the cars · Cowling Bar Boeing 747 AIR-BAR0060 · Ceiling Lamp Alpha Jet AIR-ALP0177 · Wall Fuselage AIR-FUS0159 · private garage, Gold Coast, 2025
Bar made from a Boeing 747 engine cowling in a private garage: the mirror-polished counter with the chrome stools, under the fuel tank lamp with its spotlights
The Boeing 747 cowling bar with the Space stools, under the Alpha Jet fuel tank lamp · Cowling Bar Boeing 747 AIR-BAR0060 · Space Bar Stool SED-BAR0197 · Ceiling Lamp Alpha Jet AIR-ALP0177 · private garage, Gold Coast, 2025
Coffee table made from a Continental W-670 radial engine in a private lounge, from above: the seven cylinders in a star, the spark plug leads and the round glass top over the terrazzo
The coffee table’s Continental W-670 radial engine from above: the seven painted cylinders and the spark plug leads under the glass · Coffee Table Continental W-670 AIR-TAV0052 · private garage, Gold Coast, 2025
Mirror made from a Douglas DC-8 engine cowling in a private hallway: the polished ring set into the grey wall, next to a doorway lit in red
The Douglas DC-8 cowling mirror set into the hallway wall, with the red light of the doorway · Cowling Mirror DC-8 AIR-MIR0190 · private garage, Gold Coast, 2025
Bookcase made from an Airbus A310 air intake during installation in a private room: the polished ring resting on the terrazzo floor, with the installer kneeling behind it
The installation: the bookcase ring, 265 cm across, on the floor before being lifted into the wall · Bookcase Airbus A310 AIR-LIB0173 · private garage, Gold Coast, 2025
Mirror-polished three-blade wall propeller in a private lounge: the three blades on the black slatted wall, between the lines of light
The mirror-polished three-blade propeller on the black slatted wall, above the reception desk · Wall Propeller AIR-ELI0006 · private garage, Gold Coast, 2025
Mirror made from a Douglas DC-8 engine cowling in a private hallway, seen from the house: the polished ring reflects the living room and its sofas
The Douglas DC-8 cowling mirror seen from the house: the 210 cm ring reflects the living room · Cowling Mirror DC-8 AIR-MIR0190 · private garage, Gold Coast, 2025

The pieces of the project

11 pieces · 9 with aircraft partsThe whole archive →

The space and the brief

The starting point was an ordinary garage on the Gold Coast, where the client keeps his cars. He wanted to make it his own place: a bar beside the cars, a corner to sit in with friends and, for the meetings connected to his business, a meeting room that would make an impression. No architect in between. Today the garage opens onto the bar, the lounge with the reception desk serves as an antechamber and the meeting room sits behind black-framed glass walls. The polished terrazzo floor, the black slatted walls and the lines of red light are the client’s choices: the pieces had to fit in, not cover them.

The pieces

You come in through the garage, and the first piece is the Boeing 747 cowling bar: three metres of mirror-polished skin against the back wall, with six Space bar stools in chrome in front of it. Above, hung from the ceiling, the Alpha Jet fuel tank ceiling lamp, in two parts, lighting the counter with its spotlights; on the block wall a fuselage section with five windows, polished until it reflects the cars. In the meeting room the Boeing Stearman wing table, with the single sheet of glass, 350 × 152 cm, wanted for this space, and the eight Nella chairs around it; set into the black wall like a porthole, the Airbus A310 cowling bookcase, a ring 265 cm across. The lounge has the Douglas DC-8 cowling reception desk, 205 cm, with the three-blade propeller hung on the wall above it, and in front of the sofa the Continental W-670 radial engine coffee table, seven cylinders under the glass. In the hallway, set into the wall, a Douglas DC-8 cowling mirror 210 cm across. The customisations were small, and none of substance: the pieces are those on the product pages, and each page states the provenance level of the part it comes from.

Installation and timing

The pieces crossed the world in a container, by sea, from the workshop in Reggio Emilia to the Gold Coast. Carlo Panciroli installed them on his own, in four days, from 3 to 6 February 2025. The bookcase, a ring 265 cm across, was lifted and set into the wall of the meeting room (in the photograph it is still on the floor, a moment before); the fuselage was fixed to the garage’s block wall, the lamp hung from the ceiling, the bar, the reception desk and the table assembled on site. The one thing that needed more hands was the table’s glass, 350 × 152 cm in a single sheet: laying it on the wing took four people. The photographs were taken on 6 February, the day the installation was finished.

The result

Today the man cave is the place for the cars and for friends, and the meeting room the place for business: each of the pieces does what it was chosen for. It is the first project we publish, and that is no accident: among the glass walls, the black slatted walls and the lines of red light the aircraft parts are at ease, and the mirror-polished engine cowling reflects the cars just as it reflects whoever walks in. Since that week in February client and maker have stayed friends, and still see each other: the most honest measure of how it went.

“From Italy to Australia by container, and the man who built them came to install them himself: four days and no surprises, except that in the flesh they are better than the photographs.”The client

Three people in front of the bookcase made from an Airbus A310 air intake, set into the black wall, behind the wing table
The client, his wife and Carlo Panciroli in front of the bookcase, once the installation was finished · Bookcase Airbus A310 AIR-LIB0173 · private garage, Gold Coast, 2025

Questions about this project

five one-sentence answers

Can you furnish a man cave with real aircraft parts?

Yes: engine cowling bars, radial engine and jet engine coffee tables, ejection seats and propellers are original aircraft parts turned into furniture, and 9 of them were installed in this garage.

Which aircraft do the pieces in this project come from?

From a Boeing 747 (the bar’s cowling), a Douglas DC-8 (the reception desk’s cowling and the mirror’s ring), an Airbus A310 (the bookcase’s air intake), a Boeing Stearman (the table’s wing), a Continental W-670 radial engine, an Alpha Jet fuel tank and a fuselage section: each product page states the provenance level of its part.

Who installed the pieces?

Carlo Panciroli, on his own, in four days, from 3 to 6 February 2025: on request, Arteinmotion handles installation with its own staff, abroad as well.

Can I have the same pieces for another space?

A piece born from a recovered part can be made again, but not identical, because the next one comes from another aircraft; for seven or eight items in ten we can make up to ten pieces of the same model.

Are the photographs real?

Yes: they are photographs of the finished space, taken by a professional photographer on 6 February 2025, the day the installation was finished. Each caption says what is shown and where the piece stands, with its code.

Garages and man caves

The first project in this sector.

All projects →
The next project
Your project
Do you have a garage or a man cave to furnish? Send us a floor plan with measurements, even hand-drawn, and a few photographs: we will tell you which pieces suit it.
Talk about a project